Customizing Your Telephone; Finding Out What A Button Does Using Button Inquiry; Making The Display Darker Or Lighter Using Contrast Adjustment - Nortel Enterprise Edge Feature Programming Telephone Manual

Customizing your telephone

Finding out what a button does using Button Inquiry

ƒ•‚
You can check the function of any line, intercom, or programmed button on your
Enterprise Edge telephone by pressing
Button Inquiry shows your internal number followed by the function assigned to
your single memory button.
Displays
061 <LINENAME>
SHOW
123456789012345...
VIEW‚
221 <SETNAME>
NEXT VIEW‚
<Feature name>
SHOW
Press a button
EXIT
For other displays, see

Making the display darker or lighter using Contrast adjustment

ƒ•‡
1. Press
ƒ•‡
2. Press a number on the dial pad to choose the contrast level you prefer.
3. Press
˙
On a two-line telephone, you can use the
contrast. The number of contrast levels available varies from one telephone model
to another.
P0908510 Issue 01
ƒ•‚
The display shows the number and name of the line.
Press SHOW to view the redirection status of the line.
OK
Press or press VIEW‚
£
that is too long to fit on the display. Press
OK
or OK when you are done.
The display shows the directory number of the
telephone, and the assigned name. Press
the first line assigned to ring at the intercom button.
The name of the feature assigned to a button is
displayed when you press the button. Press
OK
SHOW for additional information.
Press the button you want to check. Press
or EXIT when you are finished.
Common feature displays
.
to save your setting.
Enterprise Edge Feature Programming Telephone Guide
. On the M7100 telephone
or ·VIEW to view a number
˙
NEXT to see
or
£
ƒ
on page 149.
and display buttons to adjust the
UP DOWN
11