Memory Lock - Lanier Copier System Edition Operating Instructions Manual

Forwarding Mark
You can print a Forwarding Mark on the receiv-
er's messages which have been forwarded.
The receiver can distinguish between forwarded
messages and usual receptions.
You can specify whether or not to print a For-
warding Mark in the User Parameters.
"Changing the User Parameters"
Bit0)
Operating InstructionsFacsimile Reference (option) <Advanced Features>
p.216
(Switch02,

Memory Lock

When you switch Memory Lock on, received
messages are stored in memory and are not print-
ed automatically. When a message is received in
the Memory Lock mode, the Confidential File
(i) indicator blinks. To print this message, en-
ter the Memory Lock ID. A user without the ID
cannot print the message. This prevents an unau-
thorized person from seeing the message.
Preparation
To use Memory Lock, program the Memory
Lock ID and then switch Memory Lock on.
p.260 "Programming a Memory Lock ID"
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
The Facsimile Features menu is shown.
212