Selecting Dial/Push Phone - Lanier Copier System Edition Operating Instructions Manual

D D D D
Select [Program Memory Lock ID].
Note
If "Program Memory Lock ID" is not shown,
press [U U U U Prev.] or [T T T T Next].
E E E E
Enter an ID with number keys.
Note
If you make a mistake, press [Clear] or the
{ { { { Clear/Stop} } } } key and try again.
Operating InstructionsFacsimile Reference (option) <Advanced Features>
F F F F
Press [OK].
To cancel programming an ID, press [Cancel].
The display will return to step
G G G G
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.

Selecting Dial/Push Phone

Use this function to select a line type when the
machine is connected to a G3 analog line.
A Dial and Push line are available for selection.
Limitation
When the optional G3 expansion unit is in-
stalled, "G3-2" is displayed.
If you are only connected to an ISDN line, this
function is not available.
Note
"G3-2" is shown on the display, depending on
the number of Extra G3 Interface Units in-
stalled.
Use the same procedure to program and
change this function.
This function is not available in some areas.
261
D
.