Error Report; Power Failure Report; Reading Reports - Lanier Copier System Edition Operating Instructions Manual

10. Troubleshooting

Reading Reports

Error Report

An Error Report is printed when a message could
not be successfully sent or received.
Possible causes include a problem with your ma-
chine or noise on the telephone line. If an error
occurs during transmission, re-send the original.
If an error occurs during reception, ask the sender
to re-send the message.
Note
If the error happens frequently, contact your
service representative.
The "Page" column gives the total number of
pages. The "Page Not Sent" column gives the
number of pages that were not sent or re-
ceived successfully.
Operating InstructionsFacsimile Reference (option) <Advanced Features>

Power Failure Report

Even if the main power switch is turned off, the
contents of the machine's memory (for example,
programmed numbers) will not be lost. However,
if power is lost for about 1 hour through the main
power switch being turned off, a power cut or the
power cable being removed, contents of the Fax
memory will be lost. Lost items will include any
fax messages stored in memory using Memory
Transmission or Reception.
If a file has been deleted from memory, a Power
Failure Report is automatically printed as soon as
power is restored. This report can be used to
identify lost files. If a memory stored for Memo-
ry Transmission was lost, re-send it. If a message
received by Memory Reception or Substitute Re-
ception was lost, ask the sender to re-send it.
278