Managing Usb Memory - Roland M-480 Owner's Manual

Managing USB memory

The USB MEMORY popup of the SYSTEM SCREEN is used to
perform USB memory management.
Accessing the USB MEMORY popup
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F6 (USB MEMORY)].
fig.ScrSysUSBMemGuide.eps
1
The USB MEMORY popup will appear.
1 USB memory information
This area shows information about the USB memory.
The following information is shown:
Format
Volume Size
Free Size
2 File list
This area shows the files in the USB memory.
If you move the cursor to a folder and press [ENTER], you'll move
to the level below that folder. If you move the cursor to ".." and
press [ENTER], you'll move to the level above the current folder.
2
Type of format
Total capacity of USB memory
Available space in USB memory
Other settings and functions
The function buttons have the following operations:
[F1 (FORMAT)] Formats the USB memory (p. 163).
[F2 (MAKE FOLDER)] Creates a folder in the list (p. 164).
[F3 (NAME EDIT)] Accesses the NAME EDIT popup, where you can
edit the file name (p. 164).
[F4 (COPY)] Copies the file at the cursor position in the list
(p. 165).
[F5 (PASTE)] Pastes the copied file into the list (p. 165).
[F6 (DELETE)] Deletes the file at the cursor position in the list
(p. 165).
[F7 (SPEED TEST)] Tests the speed of USB memory.
[F8 (CLOSE)] Closes the popup.
Formatting USB memory
1.
Access the USB MEMORY popup.
fig.ScrSysUSBMem.eps
2.
Press [F1 (FORMAT)].
fig.ScrFormatConf.eps
A message will ask you to confirm the operation.
3.
Press [F8 (FORMAT)] to carry out the Format operation.
A progress message will indicate the state of formatting.
When the "Completed" indication appears, formatting is
complete.
Pressing [F7 (CANCEL)] will cancel the operation.
Do not disconnect the USB memory or switch off the
power while USB memory is being formatted.
M-480's
163