Roland M-400 Function Manual

Functionality added in version 1.100

Hide thumbs Also See for M-400:

Download this manual See also: Reference Manual

Functionality added to the M-400 Ver.1.100

Functionality added in version 1.100

• Support for RS-232C transmission and reception

• M-400RCS support

RS-232C support

Now you can use the RS-232C connector located on the rear panel to control the M-400 from an external

computer or other device. For details on the RS-232C commands, refer to the "M-400RS-232C Reference" (PDF

version), which you can obtain from the Roland website listed below.

http://www.rolandsystemsgroup.net/

RS-232C tab

An "RS-232C tab" has been added to the REMOTE popup of the SYSTEM screen.

fig.ScrRS232CGuide.eps

1. MIDI/RS-232C selection indication

This shows the status of the rear panel MIDI/RS-232C select switch.

2. RS-232C rate setting buttons

These buttons specify the RS-232C communication speed. Choose the setting that matches the speed setting

on your computer. Make sure to switch OFF the M-400's power before operating the MIDI/RS-232C select

switch.

M-400RCS support

The M-400 can now be remotely controlled from M-400RCS via its rear panel USB connector.

M-400RCS is application software that runs on Microsoft(R) Windows(R) XP. It allows you to edit M-400

project files and to remotely control the M-400.

You can obtain the "M-400RCS" software and the "M-400RCS Users Guide" (PDF version) from the Roland

website listed below. For details on using M-400RCS, refer to the "M-400RCS Users Guide."

http://www.rolandsystemsgroup.net/

M-400

40784456