Operations Using The Channel Edit Section - Roland M-480 Owner's Manual

Operations using the CHANNEL EDIT section

Most operations for the AUX, MTX, and MAIN can be performed in the CHANNEL EDIT section. Here we will explain channel operations
using the CHANNEL EDIT section.
fig.ChEditSection.eps
CHANNEL EDIT section
Selecting the channel
1.
In the LAYER section, press [AUX/MTX] to assign the
input channel to the fader module section.
2.
Press a [SEL] button to select the input channel that you
want to edit.
fig.ScrChAux.eps
The CHANNEL DISPLAY screen will appear.
Each time you press the MAIN [SEL] button, it will select the MAIN L,
MAIN R, or MAIN C one after another.
Fader module section
AUX, MTX, MAIN operations
If you clear the check mark for the CHANNEL SELECT item
"CHANNEL DISPLAY follows CH SELECT button" in User
Preference (p. 141), pressing a [SEL] will select the channel
without showing the CHANNEL DISPLAY screen. In this case, you
can access the CHANNEL DISPLAY screen by pressing the [CH
DISP] in the CHANNEL EDIT section.
Even if you operate the knobs of the CHANNEL EDIT section
without accessing the CHANNEL DISPLAY screen, the value
of the currently-operated parameter is shown in the sub-
display area.
[SEL]
LAYER section
57