Momentarily Displaying The Scene List - Roland M-480 Owner's Manual

The RECALL PARAMETERS select buttons consist of the
following items:
Item Explanation
INPUT PATCH Input patchbay setting
OUTPUT PATCH Output patchbay settings
PREAMP Preamp settings
(gain +48V phantom power, pad)
CH1–48 Input channel settings
RTN 1–6
BUS AUX, MTX, and MAIN
EFFECTS Effect and external effect insertion settings
DCA/MUTE GROUP DCA group and MUTE group settings
RECORDER USB memory recorder settings
TALKBACK/OSC Talkback and oscillator settings
The function buttons have the following operations:
[F1 (RECALL FILTER)] Turns the recall filter on/off.
[F7 (CANCEL)] Cancels the changes and closes the popup.
[F8 (OK)] Finalizes the changes and closes the popup.
3.
Press [F1 (RECALL FILTER)] to turn it on.
4.
Use the RECALL PARAMETERS select buttons to add a
check mark to the parameters that you want to recall.
5.
Press [F8 (OK)] to finalize the changes and close the
popup.
Pressing [F7 (CANCEL)] will cancel the operation.
Locking/Unlocking a scene
1.
Access the SCENE screen.
2.
Select the desired scene from the scene list.
3.
Press [F7 (LOCK)] to lock or unlock the scene.

Momentarily displaying the scene list

While carrying out other operations, you can temporary display
the scene list and perform scene memory operations.
1.
fig.ScrSceneQView_Guide.eps
settings
1
The function buttons have the following operations:
[F1 (RECALL)]
[F2 (STORE)]
[F4 (CLEAR)]
[F6 (LOCK)]
[F7 (UNDO RECALL)]
[F8 (CLOSE)]
Hold down [SHIFT] and press [DISP] in the SCENE
MEMORY section.
1
The SCENE QUICKVIEW popup will appear.
Scene list
This lists the scenes. The current scene is shown in green.
The items listed are the same as for the SCENE screen.
This recalls the mixer parameters from the
currently selected scene number.
This stores the current mixer parameters into
the currently selected scene number.
Clears the contents of the scene selected in the
scene list, making it a blank scene (p. 125).
Locks or unlocks the scene selected in the
scene list.
Undoes (cancels) the last-performed recall.
Closes the popup.
You can also make the setting for accessing the popup from a
USER button (p. 140).
Scene memory
123