Appendix; User Button Functions - Roland M-480 Owner's Manual

Appendix

User button functions

FUNCTION PARAM1
NONE -
SCENE PREV RECALL
NEXT RECALL
DIRECT RECALL
UNDO RECALL
PREV
NEXT
RECALL
STORE
SCENE QUICKVIEW
OSCILLATOR OSC 1 ON
OSC 2 ON
MONITOR SOURCE SELECT
M-48 MANAGER
M-48 SETUP
EFFECT BYPASS FX
BYPASS GEQ
EDIT FX
EDIT GEQ
TAP TEMPO
MUTE GROUP 1–8
METER PEAK CLEAR
CHANGE METER POINT
CH SELECT PREVIOUS
NEXT
CH EDIT +48V SW
PAD SW
PHASE SW
GATE SW
COMP SW
SET UNITY
RECORDER PREV SONG
NEXT SONG
PLAY/STOP
REC
MUTE MAIN L/R
MAIN C
192
PARAM2 LED
- Unlit
- Lit while held
- Lit while held
000–299 Lit while held
- Lit if UNDO is available
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit when the specified
screen is displayed
- ON: lit, OFF: unlit
AUX1–16, MTX1–8, Lit if assignment is identical Changes the monitor source to the specified source
MAIN LR, MAIN C,
MAIN MONO, MAIN
LCR, REC OUT LR
- Lit when the specified
screen is displayed
1–64 Lit when the specified
screen is displayed
FX1 L–FX6 R ON: lit, OFF: unlit
GEQ1–GEQ12 ON: lit, OFF: unlit
FX1–FX6 Lit when the specified
screen is displayed
GEQ1–GEQ12, Lit when the specified
FX1 GEQ A–FX6 GEQ B screen is displayed
Blinks in time with the
tempo
ON: lit, OFF: unlit
- Lit while held
CH, BUS Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Lit while held
- Unlit
- Unlit
- During playback/
recording: lit
- During recording: lit,
during recording standby:
blink
- ON: lit, OFF: unlit
Explanation
Recalls the scene of the previous number
Recalls the scene of the next number
Recalls the scene of the specified number
Cancels the scene recall
Moves to the previous scene number
Moves to the next scene number
Recalls the scene of the current number
Stores the scene of the current number
Accesses the SCENE QUICK VIEW popup (p. 123).
Oscillator on/off
Accesses the M-48 MANAGER popup (p. 174)
Accesses the M-48 SETUP popup (p. 176)
(PARAM2 specifies the number in the M-48 list.)
Turns Bypass on/off for the specified FX
Turns Bypass on/off for the specified GEQ
Accesses the FX EDIT popup (p. 101)
Accesses the GEQ EDIT popup (p. 106) or FX EDIT
popup.
Setting the tempo (p. 103)
Turns the specified mute group on/off
Clears the meter peak hold and Over indications
The level detection point of the specified meter will be
changed each time you press the button.
Selects the channel that precedes the current channel
Selects the channel that follows the current channel
While the button is held, [SEL] operates as an ON/OFF
switch
While the button is held, [SEL] operates as an ON/OFF
switch
While the button is held, [SEL] operates as an ON/OFF
switch
While the button is held, [SEL] operates as an ON/OFF
switch
While the button is held, [SEL] operates as an ON/OFF
switch
Hold down the button and press [SEL] to set the fader
of the corresponding channel to 0.0 dB
Selects the previous WAV file
Selects the next WAV file
Plays the selected WAV file
Puts the USB memory recorder into recording standby
Turns the specified mute on/off.