Roland M-48 Specifications

M-48 Specification
Number of Inputs 40 inputs (REAC), Stereo AUX, Ambient Mic
Number of Outputs Headphones ×2, L/R Balanced TRS, Stereo Line
AD/DA Conversion 24-bit / 96kHz, 48kHz or 44.1kHz
Nominal Input Level AUX IN: -16dBu (at max volume)
Input Impedance AUX IN: 10k ohms
Non Clip Maximum AUX IN: +2dBu
Input Level
Nominal Output Level PHONE Jacks L/R: -6dBu(at Line Out Volume = Unity, 10k ohms load)
Miniature PHONE Jack (REC L/R Output): -12dBu (at Line Out Volume = Unity,
10k ohms load)
Output Impedance PHONE Jacks (1,2): 10k ohms
LINE OUT Jacks L/R: 600 ohms
LINE OUT REC L/R Jack: 10k ohms and above
Recommended Load PHONE Jacks (1,2): 16 ohms or above (synthetic impedance 1 and 2)
Impedance
LINE OUT Jacks L/R: 10k ohms or above
LINE OUT REC L/R: 10k ohms or above
Non Clip Maximum PHONE Jacks (1,2): 250mW+250mW (1 or 2, at 1kHz/40 ohms load)
Output Level
LINE OUT Jacks L/R: +12dBu (at 1kHz/10k ohms load)
LINE OUT REC L/R Jack: +6dBu (at 1kHz/10k ohms load)
Connectors REAC EMBEDDED POWER Connector: RJ-45 EtherCon Type ×1
AUX IN: Stereo miniature phone type
LINE OUT L/R: 1/4 inch phone type - balanced
LINE OUT REC L/R: Stereo miniature phone type
PHONE (1,2): Stereo 1/4 inch phone type and Stereo miniature phone type
Power Supply DC +48V (via Cat5e cable) * S-4000D is required for power supply.
Power Consumption 13W
Dimensions 297.0 (W)×171.0 (D)×67.0 (H) mm, 11-3/4 (W) × 6-3/4 (D) × 2-11/16 (H) inches
Weight 1.5kg, 3 lbs 5 oz
S-4000D Specification
REAC Connector: RJ-45 EtherCon Type ×2
Connectors
REAC EMBEDDED POWER Connector: RJ-45 EtherCon Type ×8
Indicators REAC Power: Red ×8, Link: Green ×10, ACT: Orange ×10, Power: Blue ×1
Power Supply AC 115V, AC 117V, AC 220V, AC 240V (50/60Hz)
Dimensions 482.0 (W) × 285.0 (D) × 87.8 (H) mm, 19 (W) × 11-1/4 (D) × 3-1/2 (H) inches
Weight 4.2kg, 9 lbs 5 oz
Optional Items
APC-33 RH-PM5 RH-300
All Purpose Clamp In-Ear Monitor Stereo Headphones
The clamp used for attaching the M-48 to The ideal In-Ear Monitor tuned for live Equipped with a newly developed 45mm
the middle of a microphone, music or stage monitoring with the M-48. Designed driver with a neodymium magnet that
cymbal stand. to fit securely in your ear during live offers full dynamic range.
performances.
Ensuring high quality while protecting the environment: Roland is ISO9001 and ISO14001 certified
At Roland, several group companies have obtained ISO9001 certification. In addition, in January 1999, Roland also received ISO14001 international environmental management system certification.
We' re actively seeking ways to maintain harmony with the environment.
(ISO=International Standardization Organization: an organization for the promotion of standardization of international units and terms. They provide different categories of certification: ISO9001
Series certification is a product quality certification for products that undergo a certain level of quality control from the design stage to the after service stage; ISO14001 Series certification is for
environment-related standards. Each member of the Roland Group is striving to obtain certification.)
For more details, please visit us at
< www.rolandsystemsgroup.net > .
M-48 Monitoring System Setup
Connect with Analog Console
M-48
S-4000D
Stage
CAT5e Cable
S-4000S series
PC or
S-1608
(Control Software: S-4000RCS)
Analog Console etc.
Main Mixer
Connect with M-400 V-Mixer
M-48
S-4000D
Stage
CAT5e Cable
M-400
Main Mixer
W100S-R SC-W20F
100m CAT5e Cable on a Reel 20m Premium CAT5e Cable
Compact and light-weight cable on a reel REAC signal transfer cable with Neutrik®
with Neutrik® Ethercon connectors on Ethercon connectors on both ends with
both ends. the feel of a mic cable. Lays flat and easy
to roll up.
Copyright 2009 Roland Corporation. All right reserved.
All specification and appearances are subject to change without notice.
Jan. 2009 RAM-7022 SJ-PD
The Breakthrough Personal Mixing & Monitoring Solution