Input/Output Patchbay; Default Setting Of The Input/Output Patchbay - Roland M-480 Owner's Manual

Input/output patchbay

Default setting of the input/output patchbay

Default settings of the input patchbay
When the M-480 is in its default state, the input patchbay is set as follows:
Input channel
CH1–16
CH17–32
CH33–40
CH41–42
CH43–44
CH45–46
CH47–48
RTN1L–6R
You can also use the EFFECTS screen to patch an effect output to a channel. For details, refer to "Using an effect via send/return" (p. 100).
You can also use the RECORDER screen to patch a USB memory recorder output to a channel. For details, refer to "Specifying the output-
destination for the USB memory recorder" (p. 130).
Default settings of the output patchbay
When the M-480 is in its default state, the output patchbay is set as follows:
Output port
REAC A OUT1–6
or
OUT7–8
REAC B
OUT9–40
CONSOLE OUT1–6
OUT7–8
DIGITAL OUT L/R
86
Input port
REAC A IN1–16
REAC B IN1–16
CONSOLE IN1–8
FX5 OUT L, R
FX6 OUT L, R
PLAY L, R
STEREO IN L, R
none
Output
AUX1–6
MAIN L, R
CH1–32 DIRECT OUT
AUX1–6
MONITOR L, R
MONITOR L, R