Fader Module Section; Layer Section - Roland M-480 Owner's Manual

Fader module section

1
fig.FaderModSectGuide.eps
This section lets you control the

Layer section.

[SEL] buttons
1
Use these buttons to select the channel that you want to
control in the CHANNEL EDIT section or in the screen. The
[SEL] button of the currently selected channel will light.
[SOLO] buttons
2
These buttons turn solo on/off for each channel. The button
will be lit when solo is on.
"Using Solo" (p. 119)
Meters
3
These indicate the signal level of each channel.
"Editing the meter settings" (p. 96)
[MUTE] buttons
4
These turn muting on/off for each channel. The button will
be lit if mute is active.
Faders
5
These adjust the signal level of each channel.
1
2
3
4
5
24 channels you selected in the
Explanation of the panels
LAYER section
2
fig.LayerSectGuide.eps
1
2
3
4
This section lets you select the channel layer that will be assigned
to the fader module section. The button of the currently assigned
channel layer will be lit.
[USER] layer button
1
This switches the USER layer mode on/off. It also calls up user
faders to the fader module section.
Button User Fader Layer
[AUX/MTX] Layer 3
[CH 25–48] Layer 2
[CH 1–24] Layer 1
"Editing the user fader layers" (p. 139)
[AUX/MTX] layer button
2
This assigns AUX1–16 and MTX1–8
section.
[CH 25–48] layer button
3
This assigns CH25–48 to the fader module section
[CH 1–24] layer button
4
This assigns CH1–24 to the fader module section.
to the fader module
21