Mtx Send Operations (Aux1-16, Main L/R/C) - Roland M-480 Owner's Manual

Live mixing console
Hide thumbs Also See for M-480:
Table of Contents

Advertisement

[F6
(ALL CH POINTS)
Access the ALL CH SEND POINTS popup.
[F7 ( MTX SENDS)]
Switches to the MTX SENDS popup or the AUX
[F7 ( AUX SENDS)]
SENDS popup.
[F8 (CLOSE)]
Closes the popup.
* AUX SENDS popup only.
Setting all AUX/MTX send points in a
singe operations
1.
Access the AUX (MTX) SENDS popup.
2.
Use the [F7 ( MTX SENDS)] or [F7 ( AUX SENDS)] to
switch to the MTX SENDS popup or the AUX SENDS
popup.
3.
Press [F6 (ALL CH POINTS)] to access the ALL CH SEND
POINTS popup.
fig.ScrSendPoints_Guide.eps
MTX send operations (AUX1–16, MAIN L/R/C)
The MTX sends are used to send audio signals from AUX1–16 or
MAIN L/R/C to MTX1–8.
fig.OutBlkMtxSends.eps
MTX SEND 1–8
MTX
PRE EQ
SW SEND
LINK
PRE FADER
PAN
POST FADER
SW SEND
The MTX SENDS popup is used to perform MTX send operations.
1.
In the fader module section, press a [SEL] button to select
the desired channel.
2.
In the
AUX/MTX
SENDS area of the CHANNEL EDIT
section, press [DISP].
fig.ScrMatrixSends_Guide.eps
1
The MTX SENDS popup will appear.
1
TO MTX 1, 3...7
TO MTX 2, 4...8
AUX send/MTX send
1
Send point select buttons
These buttons select the send point for
from the following choices:
Keep
Maintains the current setting.
PRE EQ
Specifies pre-EQ.
PRE FD
Specifies pre-fader.
POST FD
Specifies post-fader.
4.
Use the send point select buttons to select the desired
send point.
5.
Press [F8 (OK)].
The AUX
or MTX
send points you selected in step 4 will be
assigned for all channels
CH1–48 and RTN1–6
operation, and the popup will close.
Pressing [F7 (CANCEL)] will cancel the operation.
1
MTX sends
1–8
These adjust the sends from the AUX or MAIN to MTX. The
MTX
send area is structured as follows:
"AUX sends 1–16, MTX sends 1–8" (p. 84)
The function buttons have the following operations:
[F3 (ALL ON)
Turns on all send switches for each send field.
[F4 (ALL OFF)
Turns off all send switches for each send field.
[F5 (UNITY)
Sets the send level to 0.0 dB for the send field at
the cursor location.
[F8 (CLOSE)]
Closes the popup.
AUX1–16 or MTX1–8
in a single
85

Advertisement

Table of Contents
loading

Table of Contents