The Global Scope Function - Roland M-480 Owner's Manual

• If you press [F5 (INSERT)], a message will ask you to confirm
the Insert operation.
Press [F8 (INSERT)] to carry out the Insert operation. The
scene you selected in step 3 and all subsequent scene will be
renumbered upward by one, and the scene you copied in
step 2 will be copied to the number you selected in step 3.
Pressing [F7 (CANCEL)] will cancel the operation.
If a scene exists at scene number 299, you won't be able to use
[F5 (INSERT)] to insert a scene.
You can't paste to a scene that's locked.
Cutting a scene
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the scene that you want to cut,
and press [F3 (CUT)].
A message will ask you to confirm Cut operation.

The Global Scope function

Global Scope is a function that lets you limit the channels and
parameters that will be recalled; its settings apply to all scenes.
The GLOBAL SCOPE popup is used to make settings for the
Global Scope function.
GLOBAL SCOPE popup
fig.ScrRecallSafeGuide.eps
1 2
Press [F8 (CUT)] to carry out the Cut operation. The selected
scene will be cut, and the numbers that follow the selected
scene number will be renumbered downward by one.
Pressing [F7 (CANCEL)] will cancel the operation.
Following step 2, you can use [F4 (PASTE)] or [F5 (INSERT)] to paste
or insert the cut scene to any desired scene number.
Erasing the contents of a scene
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the scene whose contents you
want to erase.
3.
Press [F6 (CLEAR)].
A message will ask you to confirm the Clear operation.
Press [F8 (CLEAR)] to carry out the Clear operation. The
contents of the scene you selected in step 2 will be erased.
Pressing [F7 (CANCEL)] will cancel the operation.
You can't erase a scene that is locked.
fig.ScrRecallSafeGuide2.eps
3
1 Parameter recall scope buttons
(CH1–48, RTN 1–6, AUX/MTX/MAIN tab)
These buttons specify the scope of the parameters that will
be recalled for the channels selected by the channel recall
scope buttons.
De-select the parameters that you don't want to be recalled.
Scene memory
125