Linking Main L/R And Main C; Specifying A Channel Name And Color Label; Copying Channel Settings To Another Channel - Roland M-480 Owner's Manual

AUX, MTX, MAIN operations

Linking MAIN L/R and MAIN C

If you turn [F1 (LINK to MAIN L/R)] on, you'll be able to use the
MAIN fader to control MAIN L/R and MAIN C simultaneously,
while maintaining the fader balance between MAIN L/R and
MAIN C.
By default, [F1 (LINK to MAIN L/R)] is on.
Turning on [F1 (LINK to MAIN L/R)] also links the MAIN [SOLO] /
[MUTE] operation.
If you turn [F1 (LINK to MAIN L/R)] on, the MAIN L/R fader also
controls MAIN C. Because the MAIN C fader does not control the
MAIN L/R, you can use the MAIN C fader to change the fader
balance between MAIN L/R and MAIN C.
1.
Access the CHANNEL DISPLAY screen for the MAIN C.
fig.ScrMainC.eps
Each time you press MAIN [SEL], it will select the MAIN L, MAIN
R, or MAIN C one after another.
2.
Press [F1 (LINK to MAIN L/R] to turn it on.
Specifying a channel name and
color label
You can specify a channel name and color label for each AUX,
MTX, and MAIN. The channel name can be up to six characters,
and you can select one of eight colors as the color label.
Channel name entry and color label selection are done in the
NAME EDIT popup.
For details on NAME EDIT popup, refer to "Specifying a channel
name and color label" (p. 52).
66
Copying channel settings to
another channel
Channel settings can be copied to another channel. Channel
copying is done in the AUX/MTX/MAIN COPY popup.
1.
Access the CHANNEL DISPLAY screen or the desired
copy-source channel.
fig.ScrChAux.eps
2.
Press [F3 (COPY)] to access the AUX/MTX/MAIN COPY
popup.
fig.ScrChCopyOutGuide.eps
1 2
1 Copy-source channel
This indicates the copy-source channel.
2 Copy parameter select buttons
Here you can select the parameters that will be copied. You
can select the following parameters:
ATT Attenuator
EQ 4-band EQ
Fader Fader
Balance Balance
LCR LCR button, CENTER (AUX only)
Phase Phase
Limiter Limiter
Delay Delay
DCA/Mute Grp DCA groups and MUTE groups
TO Main To MAIN (AUX only)
3 Copy-destination channel select buttons
Here you can select the copy-destination channel(s).
3