Roland M-480 Owner's Manual page 138
Live mixing console
Hide thumbs
Also See for M-480:
- Owner's manual addendum (26 pages) ,
- Owner's manual (31 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
User settings
●
OTHER tab
fig.ScrUserAccessOthGuide.eps
5
Other parameter access permission buttons
These buttons select other parameters that the user will be
able to operate. The parameters that are selected here will
be operable.
The "TALKBACK/OSC" button in the OTHER PARAMETER ACCESS
PERMISSION section enables or disables operation of the
talkback/oscillator output-destination select button (p. 117).
The function buttons have the following operations:
[F1 (CH 1–48)]
Accesses the CH
[F2 (RTN 1–6)]
Accesses the RTN 1–6 tab.
[F3
(AUX/MTX/MAIN)]
Accesses the
[F4
(OTHER)]
Accesses the OTHER tab.
[F7 (CANCEL)]
Cancels the changes and closes the popup.
[F8 (OK)]
Confirms the changes and closes the popup.
Editing the user level
The USER LEVEL popup is used to edit the user level.
You can't specify the user level for ADMIN.
1.
Access the USER screen.
fig.ScrUser.eps
2.
From the user list, select the desired user.
138
5
1–48
tab.
AUX/MTX/MAIN
tab.
3.
Press [F5 (USER LEVEL)].
fig.ScrUserAccess.eps
4.
Use the ADMIN button to specify whether the user will
have ADMIN privileges.
5.
Use [F1 (CH 1–48)]
and [F2 (RTN 1–6)]
48
tab
and RTN 1–6
tab, and specify the channels and
parameters to which the user will have access.
6.
Press
[F3
(AUX/MTX/MAIN)] to access the
tab, and specify the channels and parameters to which
the user will have access.
7.
Press
[F4
(OTHER)] to access the OTHER tab, and specify
the parameters to which the user will have access.
8.
Press [F8 (OK)] to finalize the changes and close the
popup.
Pressing [F7 (CANCEL)] will cancel the operation.
If a user who does not have ADMIN privileges attempts to
access the USER LEVEL popup, an ENTER PASSWORD popup
will appear, requesting that the ADMIN password be
entered.
• Enter the ADMIN password and press [F8 (OK)] to access
the USER LEVEL popup, where you can edit the user
level.
• If you press [F7 (CANCEL], the USER LEVEL popup will
appear in view-only mode. In view-only mode you can't
edit the user level.
to access the CH 1–
AUX/MTX/MAIN
Advertisement
Table of Contents
