Using The M-48 Library - Roland M-480 Owner's Manual

Management of the M-48 live personal mixer

Using the M-48 library

The current settings of the M-48 can be organized in the form of a
"Library," and saved on the M-480.
Accessing the M-48 LIBRARY popup
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48 unit
and press [F4 (LIBRARY)].
ig.ScrM48Library_Guide.eps
1 2
The M-48 LIBRARY popup will appear.
1 Target unit indication
This indicates the M-48 unit to which operations in the M-48
LIBRARY popup will apply.
2 Library list
This lists the library items for the target M-48.
The following items are shown in the list:
NO. Indicates the library item number.
NAME Indicates the library item name.
STATUS This will indicate LOCK if the library item is locked.
3 Recall parameter select buttons
These buttons select the parameters that will be recalled
from the library. Parameters with a check mark will be
recalled.
SOURCE LEV/PAN
SOURCE ASSIGN
PREFERENCES
GROUP MIX
188
3
Source level/pan settings
Group assign settings
Preference settings
Group mix
The function buttons have the following operations:
*
[F3 (NAME EDIT)] Accesses the NAME EDIT popup, where you can
edit the name of a library item.
[F4 (RECALL)] Recalls the library item selected in the list (p.
189).
*
[F5 (STORE)] Accesses the LIBRARY STORE popup, where
you can store to the library item selected in the
list (p. 188).
*
[F6 (CLEAR)] Clears the library item selected in the list (p.
189).
[F7 (LOCK)] Locks/unlocks the library item selected in the
list.
[F8 (CLOSE)] Closes the popup.
* Cannot be used if the selected library item is locked.
Storing to the M-48 library
1.
Access the M-48 LIBRARY popup.
2.
In the library list, select the store-destination number.
3.
Press [F5 (STORE)].
fig.ScrM48LibStore.eps
The LIBRARY STORE popup will appear.
4.
Edit the name in the name edit field, and press
[F8 (STORE)].
fig.ScrM48LibStore_Conf.eps
A message will ask you to confirm the operation.
5.
Press [F8 (STORE)]; the store operation will be executed,
and a status message will indicate the progress of the
operation.
When the store operation is completed, the message will
disappear.
Pressing [F7 (CANCEL)] will cancel the operation.
The confirmation message in step 4 will not appear if the user
preference CONFIRMATION select button "SCENE/LIB STORE" is
unchecked.