Roland M-480 Owner's Manual page 75

Listing the GATE/EXPANDER states
1.
Access the GATE EXPANDER popup.
fig.PopGate.eps
2.
Press [F1 (OVERVIEW)] to access the GATE/EXPANDER
OVERVIEW popup.
fig.ScrGateOverview.eps
This shows the overall gate/expander status for CH1–
fig.ScrGateOverviewGuide2.eps
1
2
3
4
5
6
Channel number
1
ON button
2
This turns the gate/expander on/off.
Type indication
3
This indicates the currently selected type.
Gate/expander graph
4
This shows the approximate response of the gate/expander.
GR (Gain Reduction) meter
5
This shows the amount of gain reduction for the gate/
expander.
THR knob
6
This adjusts the threshold level of the gate/expander in a
range of -80.0 dB–0.0 dB.
The function buttons have the following operations:
[F8 (CLOSE)]
Using the gate/expander library
You can recall gate/expander settings from the library, or store
the current gate/expander settings in the library.
The GATE/EXP LIBRARY popup is used to perform gate/expander
library operations.
1.
Access the GATE/EXPANDER popup.
2.
Press [F4 (LIBRARY)] to access the GATE/EXP LIBRARY
popup.
fig.PopGateLibGuide.eps
1 Channel indication
.
48
This indicates the channel to which the GATE/EXPANDER
LIBRARY popup applies.
2 Library data list
This is a list of the library data.
The function buttons have the following operations:
[F2 (PREVIEW)]
[F3 (NAME EDIT)]
[F4 (RECALL)]
[F5 (STORE)]
[F6 (CLEAR)]
[F7 (LOCK)]
[F8 (CLOSE)]
For details on library operations, refer to "Library operations" (p.
39).
Closes the popup.
1 2
Previews (auditions) the library data that is
selected in the list.
Accesses the NAME EDIT popup.
Recalls the selected library data.
Stores the current settings
library data.
Clears the selected library data.
Locks/unlocks the selected library data.
Closes the popup.
Dynamics
into the selected
75