Merge Patchbay Operations - Roland M-480 Owner's Manual

REAC applications and settings

Merge Patchbay Operations

1.
Access the S-4000M CONFIGURATION popup.
2.
Press [F1 (MERGE)] to access the MERGE tab.
fig.S4M_Config_IN_Guide.eps
Merge Patchbay
1
This part displays overall view of the S-4000M's merge
patchbay.
You can move the cursor to the Merge Patchbay and press [ENTER] to
access the S-4000M MERGE PATCHBAY popup.
3.
Move cursor to the Merge Patchbay and press [ENTER].
fig.S4000MInputPatchbay.eps
2
The S-4000M MERGE PATCHBAY popup will appear.
2 Current assign indication
This indicates the physical input source that is patched to
the channel at the cursor location.
3 Device indication
This indicates the REAC slave device that is selected by the
function buttons [F1 (PORT1)]–[F4 (PORT4)].
4 Patchbay grid
This grid lets you make patchbay settings.
fig.ScrInPatGridGuide.eps
1
3
148
1
4 3
2
4
REAC channel indication
1
This indicates the number of the REAC channels being sent to the
480.
Input indication
2
This indicates the input numbers of the REAC slave device
and the signal level s.
The color indicates the signal level as follows:
Color Signal Level
Black Below -48 dB
Green Between -48 dB and -18 dB
Yellow Above -18 dB
Patch symbol
3
A patch symbol is shown where the currently patched REAC
channel and input intersect. To change the patching, move
the cursor to the location where the desired REAC channel
and input intersect, and press [ENTER].
Unavailable area
4
The number area is shown in gray for inputs that cannot be
used with the currently connected REAC slave device.
The function buttons have the following operations:
[F1 (PORT1)]– Selects the S-4000M's REAC port
[F4 (PORT4)]
[F6 (CLEAR)] Clear all assignments of currently selected
REAC port.
[F8 (CLOSE)] Closes the popup
4.
Press [F1 (PORT1)]–[F4 (PORT4)] to select the desired S-
4000M's REAC port.
5.
Move the cursor to the intersection of the desired REAC
channel and input, and press [ENTER].
Clearing all assignments
1.
As described in step 1–4 of "Merge Patchbay Operations"
(p. 148), access the S-4000M MERGE PATCHBAY popup.
2.
Press [F6 (CLEAR)].
fig.S4M_PatchChgConf.eps
A confirmation message will ask you to confirm the
operation.
3.
Press [F8 (CLEAR)] to clear all assignments associated
with the currently selected S-4000M's REAC port.
Pressing [F7 (CANCEL)] will cancel the operation.
M-