Aux Send/Mtx Send; Aux/Mtx Send Operations (Ch1-48, Rtn1-6) - Roland M-480 Owner's Manual

AUX send/MTX send

AUX/MTX send operations (CH1–48, RTN1–6)
The AUX/MTX sends are used to send audio signals from input
channels to AUX1–16 and MTX1–8.
fig.InBlkSends.eps
CH 1-48
MUTE
PRE EQ PRE FADER POST FADER
MUTE
OPTION
RTN 1L-6R
MUTE
PRE FADER POST FADER
MUTE
OPTION
The AUX (MTX) SENDS popup is used to perform AUX/MTX send
operations.
The CH-MUTE OPTION determines whether AUX/MTX sends are
muted when the channel is muted (p. 156).
AUX (MTX) SENDS popup
1.
In the fader module section, press a [SEL] button to select
the desired channel.
2.
In the AUX/MTX SENDS area of the CHANNEL EDIT
section, press [DISP].
fig.PopAuxSends_Guide.eps
1
The AUX (MTX) SENDS popup will appear.
3.
Use the [F7 ( MTX SENDS)] or [F7 ( AUX SENDS)] to
switch to the MTX SENDS popup or the AUX SENDS
popup.
In the AUX SENDS popup, you can use the [F1 (SENDS 1–8)],
or [F2 (SENDS 9–16)] tab to switch two display pages.
AUX sends 1–16, MTX sends
1
These adjust the sends from the channel to AUX/MTX.
84
AUX SEND 1–16, MTX SEND 1–8
LEVEL SW AUX/ MTX
PRE EQ
LINK
TO
PRE FADER
1, 3...15
POST FADER PAN
LEVEL SW
PRE EQ
TO
PRE FADER
2, 4...16
POST FADER
AUX SEND 1–16, MTX SEND 1–8
LEVEL SW AUX/ MTX
LINK
TO
PRE FADER
1, 3...15
POST FADER PAN
LEVEL SW
TO
PRE FADER
2, 4...16
POST FADER
1–8
fig.PopAuxSendFieldGuide.eps
1 2
Number/Name
1
This indicates the AUX/MTX
Send level bar
2
This adjusts the send level to
+10.0 dB. The color of the send level bar indicates the send
point or the status of the send switch, as follows:
Blue PRE EQ or PRE FADER send point
Green POST FADER send point
Gray Send switch is off
ON button
3
This turns the send switch on/off.
Send point select buttons
4
These select the point from which the channel signal is sent
to AUX/MTX, from the following choices:
PRE EQ Send from the pre-EQ point.
PRE FD Send from the pre-fader point.
POST FD Send from the post-fader point
LINK switch
5
This turns the AUX/MTX stereo-link on/off.
If AUX/MTX is stereo-linked, the following parameters will be
shown for the odd-numbered
fig.PopAuxSendField2Guide.eps
6
Pan slider
6
This adjusts the send pan in a range of L63–R63.
PAN LINK button
7
This turns the PAN LINK switch on/off. If PAN LINK is on, the
pan from the channel to MAIN
from the channel to the stereo-linked AUX/MTX.
The function buttons have the following operations:
[F1 (SENDS 1–8)]* Displays the sends to AUX1–8.
[F2 (SENDS 9–16)]* Displays the sends to AUX 9–16.
[F3 (ALL ON) Turns on all send switches for each send field.
[F4 (ALL OFF) Turns off all send switches for each send field.
[F5 (UNITY) Sets the send level to 0.0 dB for the send field at
the cursor location.
3 4 5
number and name.
AUX/MTX in a range of -Inf dB–
AUX/MTX send:
7
will be linked with the pan