Saving/Loading Mixer Settings - Roland M-480 Owner's Manual

Saving/loading mixer settings

You can use USB memory to save or load mixer settings as a
project file. The LOAD/SAVE popup of the SYSTEM screen is used
to save or load mixer settings.
LOAD/SAVE popup
fig.ScrSysLoadSaveGuide.eps
1
1 Project file list
This lists the project files that are saved in USB memory.
By selecting a folder and pressing [ENTER], you can move
downward into that folder. By selecting ".." and pressing
[ENTER] you can move back to the folder above the current one.
2 LOAD SECTION select buttons
Use these buttons to select the sections for which you want
to load mixer settings.
You can select the following sections:
MIXER PARAMETER
SYSTEM SETTING
SCENE MEMORY
USER PREFERENCE
3 LOAD LIBRARY select buttons
Use these buttons to select the user libraries for which you
want to load mixer settings.
You can select following libraries:
CH
GATE
COMP
LIMITER
4-BAND EQ
AUX/MTX/MAIN
GEQ
FX
IN PATCH
OUT PATCH
M-48
2
3
Mixer parameters
System settings
Scene memories
User preference
Channel library
Gate/Expander library
Compressor library
Limiter library
4-band EQ library
AUX/MTX/MAIN library
GEQ library
Effect library
Input patchbay library
Output patchbay library
M-48 Library
Other settings and functions
The function buttons have the following operations:
[F1 (LOAD)] Loads the project file that is selected in the list
(p. 160).
[F2 (SAVE)] Saves the current mixer settings as a project file
to USB memory (p. 160).
[F3 (NAME EDIT)] Opens the NAME EDIT popup where you can
edit the name of the project file selected in the
list (p. 161).
[F4 (DELETE)] Deletes the project file that is selected in the list
(p. 161).
[F8 (CLOSE)] Closes the popup.
Accessing the LOAD/SAVE popup
1.
Access the SYSTEM screen.
fig.ScrSystem.eps
2.
Press [F3 (LOAD/SAVE)].
fig.ScrSysLoadSave.eps
The LOAD/SAVE popup will appear.
159