Explanation of the panels
USB MEMORY RECORDER section
10
fig.RecorderSectGuide.eps
1
2
[
] / [
] button
1
Here you can select the song to play, and rewind or fast-
forward the playback.
• Selecting a song
By pressing these buttons, you can jump to the beginning of
the preceding or following song. During playback, [
takes you back to the
beginning
• Rewinding or fast-forwarding during playback
By pressing and holding these buttons while a song is
playing, you can rewind or fast-forward. Normal playback
will resume when you release the button.
[
] button
2
Use this button to start or stop playback, or to start
recording.
• Playing a song
When you press this button while the recorder is stopped,
the currently selected song will play.
• Stopping a song
When you press this button while the song is playing,
playback will stop.
• Starting recording
When you press this button in recording-standby mode,
recording will start.
• Stopping recording
When you press this button while recording a song,
recording will stop.
REC button
3
Use this button to put the recorder in recording-standby
mode, or to divide the song currently being recorded.
• Recording-standby mode
When you press this button while the recorder is stopped,
the recorder will enter recording-standby mode. Press
[
] to start recording.
• Dividing the song currently being recorded
When you press this button while a song is being recorded,
recording of the song currently being recorded will be
completed, and recording of a new song will begin.
[DISP] button
4
This button accesses the RECORDER screen where you can
make recorder settings and manage the song list. It will light
red when the screen is shown.
26
3
4
]
of the playing song.
SETUP section
11
fig.SetupSectGuide.eps
1
2
[PATCHBAY] button
1
This button accesses the PATCHBAY screen where you can
make settings for the input/output patchbay. It will light red
while the screen is shown.
[SYSTEM] button
2
This button accesses the SYSTEM screen where you can
make various system settings. It will light red when the
screen is shown.
GROUP section
12
fig.GroupSectGuide.eps
1
2
1
2
[DCA] button
1
This button accesses the DCA GROUP screen where you can
control the DCA groups and make settings for them. It will
light red when the screen is shown.
[MUTE] button
2
This button accesses the MUTE GROUP screen where you can
control the mute groups and make settings for them. It will
light red when the screen is shown.