Roland M-480 Owner's Manual page 135

Saving the current user settings in USB
memory
Here's how to save the current user settings in USB memory. This
can be done if the current user setting is other than ADMIN or
GUEST.
1.
Connect USB memory to the USB memory connector.
2.
Access the USER screen.
fig.ScrUser.eps
3.
Press [F3 (SAVE CURRENT)].
fig.ScrSaveCurrent.eps
The SAVE CURRENT USER popup will appear.
4.
Use the name edit field to edit the user name.
For details on name editing, refer to "Editing a name" (p. 39).
5.
To save the settings, press [F8 (SAVE)].
Pressing [F7 (CANCEL)] will cancel the operation.
If you save to identically named user settings in USB
memory, a caution message will caution you that the
previous data will be overwritten.
fig.UsrExists.eps
To save and overwrite the old data, press [F8 (REPLACE)].
Pressing [F7 (CANCEL)] will cancel the operation.
Deleting user settings
Here's how to delete user settings from USB memory.
You can delete user settings if the current user setting has ADMIN
privileges.
1.
Access the USER screen.
2.
From the USB memory user list, select the user that you
want to delete.
3.
Press [F4 (DELETE USER)].
fig.ScrUserDeleteConf.eps
A message will ask you to confirm that you want to delete
the user settings.
4.
When you press [F8 (DELETE USER)], the user settings
you selected in step 2 will be deleted.
Pressing [F7 (CANCEL)] will cancel the operation.
Editing the name of user settings
You can edit the name of a user. A name of up to eight characters
can be specified.
1.
Access the USER screen.
2.
From the user list, select the desired user.
3.
Press [F7 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4.
Use the name edit field to edit the user name.
5.
Press [F8 (OK)] to finalize the name you edited and close
the popup.
Pressing [F7 (CANCEL)] will cancel the operation.
For details on name editing, refer to "Editing a name" (p. 39).
User settings
135