Copying M-48 Settings - Roland M-480 Owner's Manual

3.
The following items of the preference settings (p. 177)
can be edited.
• SOLO MODE select buttons
• LAYER select clears SOLO button
• LINE OUT MODE select button
The LINE OUT SOURCE select button and the LINE OUT LPF
select button follows the settings of the musician's side.
MEMORY operation on the Engineer's Monitor unit is not
allowed.
4.
Make the desired setting for the MONITOR-ONLY select
button.
If you want to control the musician's group mix from the
Engineer's Monitor unit, clear the MONITOR-ONLY button.
5.
Press [F8 (CLOSE)] to close the popup.

Copying M-48 settings

1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired copy-
source M-48 unit, and press [F3 (COPY)].
fig.ScrM48Copy_Guide.eps
1 2
The M-48 COPY popup will appear.
1 Copy-source unit indication
This indicates the copy-source M-48 unit.
Management of the M-48 live personal mixer
Releasing the Engineer's Monitor unit
1.
2.
3.
fig.M48_EngMonConf02.eps
4.
2
3
3
The function buttons have the following operations:
[F1 (MARK ALL)]
[F2 (CLEAR MARKS)]
[F5 (PASTE)]
[F8 (CLOSE)]
Access the M-48 MANAGER popup.
Press [F6 (ENG MON SETUP)].
The M-48 ENGINEER'S MONITOR SETUP popup will appear.
Press [F6 (RELEASE ENG MON)].
A message will ask you to confirm the operation.
Press [F8 (RELEASE)] to release the ENGINEER'S MONITOR
unit.
Pressing [F7 (CANCEL)] will cancel the operation.
Copy-destination list
Specify the copy-destination M-48 unit(s) in this list.
The list shows the following items:
DEST Press [ENTER] to add or clear the check
mark. A check mark indicates that the unit
is selected as a copy-destination.
NO. Indicates the number in the list.
UNIT NAME Indicates the unit name.
Copy parameter select buttons
Use these to select the parameters to be copied. Parameters
for which there is a check mark will be copied.
SOURCE LEV/PAN Source level/pan settings
SOURCE ASSIGN Group assignment settings
PREFERENCES Preference settings
GROUP MIX Group mix
Adds a check mark to all DEST fields of the
copy-destination list.
Clears the check marks from all DEST fields of
the copy-destination list. This indication will be
on if any DEST fields have check marks.
Executes the copy.
Closes the popup.
185