Main Fader Module; Channel Edit Section - Roland M-480 Owner's Manual

Explanation of the panels

MAIN fader module

3
fig.MainFaderModGuide.eps
1
2
3
4
[SEL] button
1
This button selects the MAIN channel so that it can be
controlled from the CHANNEL EDIT section or in the screen.
It will light if the MAIN channel is selected.
By repeatedly pressing [SEL] you can alternately select the MAIN
L, MAIN R, or MAIN C channels.
[SOLO] button
2
This button turns solo on/off for the
will be lit if solo is on.
[MUTE] button
3
This turns muting on/off for the MAIN L/R/C channel. The
button will be lit if mute is active.
Fader
4
This adjusts the signal level of the
22
MAIN L/R/C channels. It
MAIN L/R/C channels.

CHANNEL EDIT section

4
fig.ChEditSectGuide.eps
6
1 2
3
4
5
In this section you can operate the main parameters of the
currently selected channel.
[TOUCH SELECT] button
1
This button turns the Touch Select function on/off. It will
light if the Touch Select function is on.
The Touch Select function lets you select a channel by touching
its fader.
[CH DISP] button
2
This button accesses the CHANNEL DISPLAY screen. It will
light red when the screen is shown.
fig.ChEdtBtn.eps
7 8 9