M-48 Memory Operations - Roland M-480 Owner's Manual

Management of the M-48 live personal mixer
3.
Verify that the copy-source unit indication shows the
desired M-48 unit.
If the wrong copy-source unit is selected, press [F8 (CLOSE)]
to close the popup, return to step 2, and select the desired
copy source.
4.
In the copy-destination list, add a check mark to the
desired copy-destination M-48 units.
Press [ENTER] to assign or clear a check mark.
You can use [F1 (MARK ALL)] or [F2 (CLEAR MARKS)] to assign or
clear check marks for all DEST fields in the copy-destination list.
5.
Use the copy parameter select buttons to select the
parameters that you want to copy.
6.
Press [F5 (PASTE)].

M-48 memory operations

You manipulate M-48 memory using the M-48 MEMORY popup.
Accessing the M-48 MEMORY popup
1.
Access the M-48 MANAGER popup.
fig.ScrM48Manager.eps
2.
In the M-48 list, move the cursor to the desired M-48
MEMORY NO., and press [ENTER].
The M-48 MEMORY popup will appear.
There are two views: the SELECTED UNIT tab and the ALL
UNITS tab.
• SELECTED UNIT tab
fig.ScrM48Memory.eps
In this tab you can manipulate the memories of the M-48
unit that is selected in the M-48 list.
186
fig.ScrM48Copy_Conf.eps
A message will ask you to confirm the operation.
7.
Press [F8 (PASTE)].
The copy will be executed, and a message indicating the
processing status will appear. This message will close when
copying is completed.
Pressing [F7 (CANCEL)] will cancel the operation.
• ALL UNITS tab
fig.ScrM48MemoryAll.eps
In this tab you can manipulate the memories of all M-48
units (except for units whose MEMORY SAFE function is on).
fig.ScrM48Memory_Guide.eps
1
1 Target unit indication
This indicates the M-48 that is the target of memory
operations.
2 Memory list
This lists the memories of the target M-48 unit. The current
memory number is shown in green.
The list shows the following items:
NO. Indicates the memory number.
NAME Indicates the memory name.
* This is not shown in the ALL UNITS tab.
2
*