Screen Operations - Roland M-480 Owner's Manual

Basic operation

Screen operations

About the screen display
fig.ScrGuide.eps
1
2
Top display area
1
fig.ScrTBScrDisp.eps
1 2
This area is always shown in the upper part of the screen.
Screen name
1
This shows the name of the screen currently shown in the
main display area.
The background color of the Screen name will change
depending on the channel layer selected:
Layer Color
CH 1–24 Yellow
CH 25–48 Orange
AUX/MTX Blue
USER Layer 1 Yellow with red line
USER Layer 2 Orange with red line
USER Layer 3 Blue with red line
Channel indicator
2
This indicates the currently selected channel's number,
name, and port name.
A port name such as "A: IN 1" blinks when the corresponding
input/output unit is not connected correctly, or a non existent
port is patched to the channel.
36
3 4 5 6
REAC indications
3
These indicate the status of the REAC A/B:
Display Description
Unlighted No REAC device connected
Flashing Establishing connection with REAC device.
Lighted Normal connection with REAC device
Date&time indication
3
This shows the current date and time.
User setting indication
5
This shows the current user settings.
Scene indication
6
This shows the number and name of the currently selected
scene.
Main display area
2
fig.ScrMainArea.eps
Most screen operations are performed in this area. The name of
the current screen is shown in the screen name indication of the
top display area. You can use the cursor and function buttons to
perform operations in this area.
3
4