Using The Usb Memory Recorder - Roland M-480 Owner's Manual

Using the USB memory recorder

USB memory recorder settings are made in the RECORDER
screen.
Accessing the RECORDER screen
1.
In the USB MEMORY RECORDER section, press [DISP].
fig.ScrRecorderGuide.eps
1
2 3 4
The RECORDER screen will appear.
The USB memory recorder plays WAV files located in the "/
RSS/M-400/SONGS" folder of USB memory in the order of
their name.
1 Song list
This area shows the WAV files in the SONGS folder. The WAV
file selected for playback will be underlined.
NO. Indicates the alphabetical order of the WAV files.
NAME Indicates the name of the WAV file.
TIME Indicates the date and time that the WAV file was
last edited.
FORMAT Indicates the format of the WAV file.
LENGTH Indicates the time length of the WAV file.
To select songs in the song list, use [
MEMORY RECORDER section.
2 RECORDER SOURCE SELECT popup buttons
These buttons access the RECORDER SOURCE SELECT popup,
where you can select the input-source for the USB memory
recorder. The current input-source channel is shown on the
button. This can be set separately for the L and R channels.
3 REC Lev knob
This adjusts the recording level of the USB memory recorder
in a range of -Inf dB–+10.0 dB.
4 REC meter
This indicates the recording level of the USB memory
recorder.
5 6 7
] and [ ] of the USB
USB memory recorder
5 Recorder display
fig.ScrRcdrDisp.eps
1 2
4 5
Recorder status
1
This indicates the recording or playback status of the USB
memory recorder.
fig.TportIconPlay.eps
Playing
fig.TportIconRec.eps
Record-ready or recording
WAV file name
2
This indicates the name of the WAV file currently being
recorded or currently selected for playback.
Playback mode
3
This indicates the playback mode. The following playback
modes are provided:
fig.RptIconOnce.eps
Play one song
fig.RptIconRpt.eps
Repeat one song
fig.RptIconAllOnce.eps
Play to the last song
fig.RptIconAllRpt.eps
Repeat all songs
Time indicator
4
This indicates time information for the WAV file currently
being recorded or played.
REMAIN
5
If a WAV file is playing, this indicates the remaining playback
time of the WAV file.
During recording, this indicates the remaining amount of
time that can be recorded to USB memory.
6 PLAY meter
This indicates the playback level.
7 RECORDER DESTINATION SELECT popup buttons
These buttons access the RECORDER DESTINATION SELECT
popup, where you can select the output-destination for the
USB memory recorder. The current output-destination
channel is shown on the button. This can be set separately
for the L and R channels.
3
129