Assigning Channels To Dca Groups And Mute Groups - Roland M-480 Owner's Manual

Assigning channels to DCA
groups and MUTE groups
Input channels can be assigned to DCA groups and mute groups.
Assignments to DCA groups and mute groups are made in the
DCA/MUTE GROUP ASSIGN popup.
Accessing the DCA/MUTE GROUP ASSIGN
popup
1.
Access the CHANNEL DISPLAY screen for the desired
channel.
fig.ScrChDisp.eps
2.
Press [F5 (DCA/Mute GROUP ASSIGN)]
MUTE GROUP ASSIGN popup.
fig.ScrChGrpAsgnGuide.eps
1 Target channel
This indicates the channel that is the target of the
MUTE GROUP ASSIGN popup.
2 DCA GROUP select buttons
Use these to select the DCA group to which the channel will
be assigned.
3 MUTE GROUP select buttons
Use these to select the MUTE group to which the channel
will be assigned.
Assigning a channel to a DCA group
1.
fig.ScrChGroupAssign.eps
2.
3.
4.
Assigning a channel to a MUTE group
1.
to access the DCA/
fig.ScrChGroupAssign.eps
1
2
3
2.
3.
DCA/
4.
Input channel operations
Access the DCA/MUTE GROUP ASSIGN
desired channel.
Verify that the target channel is correct.
Move the cursor to the desired DCA group select button,
and press [ENTER] to select it.
Press [F8 (CLOSE)] to close the popup.
For details, refer to "DCA groups" (p. 112).
Access the DCA/MUTE GROUP ASSIGN
desired channel.
Verify that the target channel is correct.
Move the cursor to the desired MUTE group select
button, and press [ENTER] to select it.
Press [F8 (CLOSE)] to close the popup.
For details, refer to "Mute groups" (p. 114).
popup for the
popup for the
55