Editing The User Button - Roland M-480 Owner's Manual

Live mixing console
Hide thumbs Also See for M-480:
Table of Contents

Advertisement

User settings

Editing the user button

The user buttons are a function for assigning desired functions to
the [1] through [8] buttons on the USER section (p. 28). You can
make settings for 16 user buttons. You can operate user buttons
1 through 8 using the [1] through [8] buttons, and you can
operate user buttons 9 through 16 by holding down [SHIFT] and
pressing the [1] through [8] buttons.
Editing the user button assignments
1.
Access the USER screen.
fig.ScrUser.eps
2.
From the user list, select the desired user.
3.
Press [F6 (USER PREF)].
The USER PREFERENCE popup will appear.
4.
Press
[F4
(BUTTON 1–8)] (or
access the BUTTON 1–8 tab (or the BUTTON 9–16 tab.)
fig.ScrUserBtnGuide.eps
1
Applicable user indication
This indicates the user settings to which the USER
PREFERENCE popup applies.
2
User button assign 1–8 (9–16)
This area indicates the functions that are assigned to user
buttons 1–8. (or user buttons 9–16)
140
[F5
(BUTTON 9–16)]) to
1
2
5.
Move the cursor to the desired user button assignment,
and press [ENTER].
fig.ScrUserBtnAsgn.eps
4
3
The USER BUTTON EDIT popup will appear.
3
Applicable user button
This indicates the user button to which the USER BUTTON
ASSIGN popup applies.
4
FUNCTION list
You can select a function from this list.
5
PARAMETER 1 and 2 list
Here you can select the parameters of the function you've
selected in the FUNCTION list.
The function buttons have the following operations:
[F6 (PREV BUTTON)]
Changes the target user button.
[F7 (NEXT BUTTON)]
[F8 (CLOSE)]
Confirms the changes and closes the popup.
6.
In the FUNCTION list, select the desired function.
7.
Next, use the PARAMETER 1 list and PARAMETER 2 list to
select the parameters.
For a list of the functions that can be assigned, refer to "User
button functions" (p. 192).
8.
Press [F8 (CLOSE)] to finalize the changes and close the
USER BUTTON ASSIGN popup.
9.
Press [F8 (OK)] to finalize the USER PREFERENCE changes
and close the popup.
Pressing [F7 (CANCEL)] will cancel the operation.
5

Advertisement

Table of Contents
loading

Table of Contents