Editing The Scene List - Roland M-480 Owner's Manual

Scene memory

Editing the scene list

The SCENE LIST EDIT popup is used to edit the scene list.
Accessing the SCENE LIST EDIT popup
1.
Access the SCENE screen.
2.
Press [F3 (LIST EDIT)].
fig.ScrSceneListMoveGuide.eps
1
The SCENE LIST EDIT popup will appear.
In the SCENE LIST EDIT popup you can edit the scene names,
and copy, cut, paste, insert, or clear scenes in the list.
1 Scene list
This is a list of the scenes.
The function buttons have the following operations:
[F1 (NAME EDIT)] Accesses the NAME EDIT popup, where you can
edit the scene name (p. 124).
[F2 (COPY)] Copies the scene selected in the scene list (p.
124).
[F3 (CUT)] Cuts (removes) the scene selected in the scene
list (p. 125).
[F4 (PASTE)] Pastes the copied or cut scene to the selected
number (p. 124).
[F5 (INSERT)] Inserts the copied or cut scene to the selected
number (p. 125).
[F6 (CLEAR)] Erases the content of the scene selected in the
scene list, returning it to a blank scene (p. 125).
[F7 (LOCK)] Locks or unlocks the scene that's selected in the
scene list.
[F8 (CLOSE)] Closes the popup.
When you use [F2 (COPY)] or [F3 (CUT)], the contents of the
selected scene will be temporarily saved in the clipboard. [F4
(PASTE)] or [F5 (INSERT)] paste or insert the contents that
were saved in the clipboard. The contents of the clipboard
will disappear when you close the SCENE LIST EDIT popup.
124
Editing the name of a scene
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the scene whose name you
want to edit.
3.
Press [F1 (NAME EDIT)].
fig.ScrNameEdit.eps
The NAME EDIT popup will appear.
4.
Move the cursor to the name edit field, and edit the scene
name.
For details on name editing, refer to "Editing a name" (p. 39).
5.
Press [F8 (CLOSE)] to close the popup.
You can't edit the name of a scene that is locked.
Copying a scene to another number
1.
Access the SCENE LIST EDIT popup.
2.
From the scene list, select the copy-source scene, and
press [F2 (COPY)].
A message will ask you to confirm the Copy operation.
Press [F8 (COPY)] to save the selected scene in the clipboard.
Pressing [F7 (CANCEL)] will cancel the operation.
3.
Select the desired copy-destination scene from the scene
list.
4.
Press [F4 (PASTE)] or [F5 (INSERT)] to copy the scene.
• If you press [F4 (PASTE)], a message will ask you to confirm
the insert operation.
Press [F8 (PASTE)] to carry out the Paste operation. The scene
you selected in step 2 will be overwritten onto the number
you selected in step 3.