Pitch Shift - Roland M-480 Owner's Manual

HI FREQ DAMP GAIN
High-frequency attenuation of the delay sound
Value: -36.0–0.0 dB
HI FREQ DAMP FREQ
Frequency at which the high-frequency region of the delay
sound begins to be attenuated
Value: 200 Hz–20.00 kHz
WET POSITION
The wet position specifies how the delay's wet signal is related
to the position of the DPF (Damp Filter).
Value
PRE DAMP: Takes the wet sound from before the damp
filter.
The signal before passing through the damp
filter is used as the wet signal. In this case,
the damp filter is applied only to the delay
feedback.
POST DAMP: Takes the wet sound from after the damp
filter.
the signal after passing through the damp
filter is used as the wet signal. In this case,

Pitch shift

P.SHIFTER x2 (Pitch Shifter x2)
fig.AlgoDualPS.eps
Input A DRY
Pitch Shifter
Input B DRY
Pitch Shifter
This is a dual-mono pitch shifter.
Pitch Shifter A/B
MODE
Value
MONO VOICE: Suitable for a monophonic voice.
MONO INST: Suitable for a monophonic instrument.
POLY FAST, POLY MID, POLY SLOW:
Suitable for polyphonic instruments
The difference between POLY FAST, POLY MID, and POLY SLOW
is in the length of time (delay) it takes before the pitch-shifted
sound is produced.
POLY FAST offers a shorter time until the pitch-shifted sound is
heard, but the pitch-shifted sound will be less stable.
POLY SLOW takes a longer time until the pitch-shifted sound is
WET (Wet Level)
Level of the delay sound
Value:
DRY (Dry Level)
Level of the original sound
Value:
heard, but the pitch-shifted sound will be more stable.
POLY MID has a response time for the pitch-shifted sound that is
between POLY FAST and POLY SLOW.
Output A
COURSE
Amount of pitch shift (in semitone steps)
Value:
FINE
Output B
Amount of pitch shift (in one-cent steps)
Value:
Use the Coarse setting to specify the approximate pitch, and make
fine adjustments using Fine.
WET (Wet Level)
Level of the pitch-shifted sound
Value:
DRY (Dry Level)
Level of the original sound
Value:
Appendix
the damp filter is applied to all of the delay
sound.
-Inf–+6.0 dB
-Inf–+6.0 dB
-12–12
-100–100
-Inf–+6.0 dB
-Inf–+6.0 dB
213