Roland M-480 Owner's Manual page 102

Effects and GEQ
Editing effect parameters
1.
Access the FX EDIT popup for the desired effect.
fig.ScrFxEdit.eps
2.
Use [F1]–[F6] to switch between tabs to view the
parameters you want to edit.
3.
Move the cursor to the desired parameter, and use the
value dial to change the value.
4.
Press [F8 (CLOSE)] to close the popup.
Using the effect library
The effect library is used to select the effect type. You can recall
effect settings from the library, and store the current effect
settings in the library.
Effect library operations are performed in the FX LIBRARY popup.
1.
Access the FX EDIT popup for the desired effect.
2.
Press [F7 (LIBRARY)].
fig.ScrFxLibGuide.eps
1
2
4
The FX LIBRARY popup will appear.
102
3
1 Applicable effect indicator
This indicates the FX to which the FX LIBRARY popup applies.
2 MODE select buttons
These select the effect mode from the following choices:
EFFECT Use as a conventional effect.
GEQ x2 Use as a dual GEQ.
3 Library data list
This is the list of library data.
buttons to select "GEQ x2", the GEQ library (p. 109) will be
shown:
NO. Indicates library data numbers.
Preset data number is start with 'P'.
User data number is start with 'U'.
NAME Indicates the name of library data.
TYPE Indicates the effect type.
STATUS "PRESET" is shown for the preset data.
"LOCK" is shown for the locked user data.
4 Applicable GEQ select buttons
If you've used the MODE select buttons to select "GEQ x2",
these buttons select whether the A side or B side will be the
target of library operations.
The function buttons have the following operations:
[F2 (PREVIEW)] Previews (auditions) the library data that is
selected in the list.
[F3 (NAME EDIT)] Accesses the NAME EDIT popup.
[F4 (RECALL)] Recalls the selected library data.
[F5 (STORE)] Stores the current settings into the selected
library data.
[F6 (CLEAR)] Clears the selected library data.
[F7 (LOCK)] Locks/unlocks the selected library data.
[F8 (CLOSE)] Closes the popup.
For details on library operations, refer to "Library operations" (p.
39).
If you've used the MODE select