12: Network; 13: Sd Card/Usb Memory - Roland VR-6HD Reference Manual

Menu List

12: NETWORK

Value (bold text: default
Menu item
value)
ENTER
NETWORK INFORMATION
PRIORITY LAN, TETHERING
Selects how settings are made for the IP address, subnet mask, and default gateway.
MANUAL
CONFIGURE
USING DHCP
IP ADDRESS (*1) –––.–––.–––.–––
SUBNET MASK (*1) –––.–––.–––.–––
DEFAULT GATEWAY (*1) –––.–––.–––.–––
DNS SERVER (*1) –––.–––.–––.–––
TETHERING START, STOP
2D CODE FOR SMART TALLY ENTER
NETWORK PASSWORD ENTER
––:––:––:––:––:––
MAC ADDRESS
(*1) This can be set if "CONFIGURE" is "MANUAL".

13: SD CARD/USB MEMORY

Menu item
SD CARD
EJECT
FORMAT
SPEED TEST
USB MEMORY
EJECT
FORMAT
SPEED TEST
RESTORE ALL SETTINGS
BACKUP ALL SETTINGS
136
Explanation
Displays the following information.
Item Explanation
CONNECTION Connection status
IP ADDRESS
IP address
SUBNET MASK Subnet mask.
DEFAULT GATEWAY
Default gateway
DNS SERVER DNS server
Sets whether to prioritize the LAN connection or your smartphone tethering when
streaming.
This is to be configured manually.
The IP address and other information needed for connecting to the network is obtained
automatically from the DHCP server of the LAN.
Specifies the IP address as appropriate for the network to which the unit is connected.
Specifies the subnet mask as appropriate for the network to which the unit is connected.
Specifies the default gateway as appropriate for the network to which the unit is connected.
Specifies the DNS server address as appropriate for the network to which the unit is
connected.
Starts/stops tethering with your smartphone.
QR code for accessing the Smart Tally settings screen (Web)
* Note that the QR code is not shown if the VR-6HD is disconnected from the network.
Displays the NETWORK PASSWORD screen.
Set the necessary password for network connection, using four characters.
Show password
* Input the password that's set here when connecting a computer or other device on the same network
Shows the MAC address of the VR-6HD.
Value (bold text: default
Explanation
value)
These are the SD card-related parameters.
EXEC Safely ejects and allows you to remove the SD card.
EXEC Formats the SD card.
EXEC Measures the data write speed to the SD card.
These are the USB flash drive-related parameters.
EXEC Safely ejects and allows you to remove the USB flash drive.
EXEC Formats the USB flash drive.
EXEC Measures the data write speed to the USB flash drive.
Shows a list of the setting files (.VR6) that are on the USB flash drive.
ENTER
You can select a setting file and restore the settings into the unit. The current settings are
overwritten.
Shows a list of the setting files (.VR6) that are on the USB flash drive.
You can select the settings file used to back up the current settings to the USB flash drive.
ENTER
* Some settings are not saved to the file, such as the "TEST PATTERN" and "TEST TONE" settings in the
Password not set
– – – –
Password set
to access the VR-6HD.
SYSTEM menu.