Turning The System On Or Off And Keypad Commands; Arming And Disarming The System; Master Arming; Disarming - Bosch D9412GV3 Quick Reference Manual

D9412GV3/D7412GV3/D7212GV3
8

Turning the System ON or OFF and Keypad Commands

8.1

Arming and Disarming the System

8.1.1

Master Arming

Enter the passcode and [ENTER] to arm all areas where the user has authority and are areas
within the scope of the keypad.
8.1.2

Disarming

Enter the passcode and [ENTER] to disarm all areas where the user has authority and are
areas within the scope of the keypad.
8.1.3

Set Duress +1 Using RPS

1.
2.
3.
8.2 Basic and Advanced Commands
Basic Commands
CMD 1 (Master Arm) [Master Arms only the
area assigned to the Keypad]
CMD 11 (Master Arm Instant)
CMD 3 (Perimeter Delay)
CMD 4 (Silence Trouble Sounder)
CMD 4, 0 (View memory)
CMD 4, 4 (Walk Test)
CMD 4, 7 (Reset Sensors)
CMD 6 (Watch Mode)
CMD 7 (Special Alert)
CMD 8 (Perimeter Partial)
CMD 9 (Special Alert)
CMD 2 Perimeter Instant
Table 8.1 Basic and Advanced Commands
99 Enter Commands
For each of the following commands, press [9] [9] [ENTER]. Press [NEXT] to view each
command.
–
–
–
–
–
–
Bosch Security Systems, Inc.
Go to PANEL WIDE PARAMETERS→Miscellaneous→Duress Type. Select 1.
Go to AREA WIDE PARAMETERS→Area Parameters→Duress Enable. Select YES.
Go to User Interface→Authority Levels. In the authority levels to be used, select E for
the Send Duress parameter.
1 - View Log
2 - Print Log
3 - Display Revision
4 - Service Walk
5 - Default Text
6 - Keypad Programming (Requires Service Passcode)
Quick Reference Guide
Turning the System ON or OFF and Keypad Commands | en
Advanced Commands
CMD 0 (Bypass a Point)
CMD 00 (Unbypass a Point)
CMD 41 (Test Report)
CMD 42 (Status Report)
CMD 43 (Remote Program)
CMD 45 (Change Time/Date)
CMD 49 (Change Display)
CMD 50 (Move to Area)
CMD 51 (Extend Closing)
CMD 52 (Change Sked)
CMD 53 (Delete Passcode)
CMD 54 (Change Relay)
CMD 55 (Change Passcode)
CMD 56 (Add Passcode)
CMD 58 (Fire Test)
PRINT LOG (99 [ENTER])
VIEW LOG (99 [ENTER])
17
F01U170805 | 01 | 2010.11