Table of Contents
Advertisement
A
B –
PPENDIX
The top-level functions menus are:
>
Configuration
>
Print Information
>
Print Secure Job
>
Menus
>
Admin Setup
>
Calibration
The two other special top-level menus are:
>
Print Statistics
>
Boot Menu
The following tables summarise the Configuration, Print Information, Print Secure Job and
Menus menu trees and provide some usage examples. The menu trees are given to the
lowest menu item level. Typically, this can be a parameter that can be set by selecting from
a range of values provided or a command that can be executed to display or print a status
or setting value.
Emboldened values followed by an (A) denote default values associated with locations
where A4 is default paper size. Emboldened values followed by an (L) denote default values
associated with locations where Letter is default paper size. Emboldened values followed
by neither (A) nor (L) denote common defaults.
Certain menus and items associated with, for example, the Finisher appear only if the
associated hardware is installed or under certain conditions.
The remainder of the menus above are intended for more specialised usage and are not
described further here. For full details of using all menus to configure and use the printer,
refer to the Configuration Guide.
MENU SYSTEM
Appendix B – menu system > 68
Advertisement
Table of Contents
