Printed page is light or blurred.
Problem:
Toner is low.
Solution:
Replace the toner cartridge. See
Problem:
The printer darkness is improperly set.
Solution:
Adjust the Printer Darkness setting:
1. Open the Status Monitor.
2. Click the Printer Setup tab
3. Click the Printer Menu button
4. Click on the Darkness scrolling menu and adjust the setting.
Problem:
Paper being used is not meant for laser printers/copiers.
Solution:
Use smooth, high-quality paper. Check specifications in
Problem:
The LED array is dirty.
Solution:
Clean the LED array. See
Problem:
Poor connection between the printer and the image drum cartridge.
Solution:
Clean and check the contacts inside the printer, on the left. See
Image Drum Contacts
Problem:
Incomplete toner fusing caused by using paper exposed to high humidity.
Solution:
- Change paper stocks.
- Check paper storage environment or use a dehumidifier. See
How to Replace the Toner Cartridge
Cleaning the LED Array
OKIPAGE 6w
Selecting
Paper.
Cleaning the
Storing Paper
67