Print Quality; Draft: The Default; Hsd: High Speed Draft; Lq: Letter Quality - Oki ML690 User Manual

Print Quality

Important!
Front panel settings for print quality and character
pitch are normally overridden by software commands.

Draft: the default

Medium quality, medium speed (360/540 cps)

Gothic typeface only


HSD: High Speed Draft

Lower quality, higher speed (480 cps)

Gothic typeface only


LQ: Letter Quality

Highest quality, slowest speed (120 cps)

Courier, Roman, Swiss, Orator, Gothic, Prestige,

OCR-A, or OCR-B
Note: Available Print Quality settings depend on which
Character Pitch setting is selected.
There are three
PRINT QUALITY
indicator lights:
The sequence of lights shows which print quality
setting is active:
   HSD
   Draft
   Courier
   Roman
   Swiss
Swiss-B
  
   Orator
  Gothic

  Prestige

 OCR-A
 
  OCR-B

(
 = light off,  = light on,  = blinking light)
The default
PRINT QUALITY
To change the
PRINT QUALITY
key. Each time the key is pressed the light sequence
above the
PRINT QUALITY
options have been cycled through.
is "Courier."
press the
PRINT QUALITY
key changes until all the
ML690/ML691 User's Guide