Ip Dhcp Snooping Trust; Ip Dhcp Snooping Log-Invalid - NETGEAR ProSafe GSM7224P User Manual

Format
ip dhcp snooping limit {rate pps [burst interval seconds]}
Mode
Interface Config
no ip dhcp snooping limit
Use this command to set the rate at which the DHCP Snooping messages come, and the
burst level, to the defaults.
Format
no ip dhcp snooping limit
Mode
Interface Config

ip dhcp snooping log-invalid

Use this command to control the logging DHCP messages filtration by the DHCP Snooping
application.
Default
disabled
Format
ip dhcp snooping log-invalid
Mode
Interface Config
no ip dhcp snooping log-invalid
Use this command to disable the logging DHCP messages filtration by the DHCP Snooping
application.
Format
no ip dhcp snooping log-invalid
Mode
Interface Config

ip dhcp snooping trust

Use this command to configure the port as trusted.
Default
disabled
Format
ip dhcp snooping trust
Mode
Interface Config
no ip dhcp snooping trust
Use this command to configure the port as untrusted.
Format
no ip dhcp snooping trust
Mode
Interface Config
ProSafe Managed Switch
Switching Commands
148