Show Ip Vrrp; Show Ip Vrrp Interface - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Authentication
The total number of VRRP advertisements received for which 'auth type' not equal to
Type Mismatch
locally configured one for this virtual router.
Packet Length
The total number of VRRP packets received with packet length less than length of VRRP
Errors
header.

show ip vrrp

This command displays whether VRRP functionality is enabled or disabled on the switch. It
also displays some global parameters which are required for monitoring. This command
takes no options.
Format
show ip vrrp
Modes
• Privileged EXEC
• User EXEC
Term Definition
Admin Mode
The administrative mode for VRRP functionality on the switch.
Router
The total number of VRRP packets received with an invalid VRRP checksum value.
Checksum
Errors
Router Version
The total number of VRRP packets received with Unknown or unsupported version
Errors
number.
Router VRID
The total number of VRRP packets received with invalid VRID for this virtual router.
Errors

show ip vrrp interface

This command displays all configuration information and VRRP router statistics of a virtual
router configured on a specific interface. Use the output of the command to verify the track
interface and track IP route configurations.
Format
show ip vrrp interface {<interface-name> <vrid> }
Modes
• Privileged EXEC
• User EXEC
Term Definition
Primary IP
The configured IP address for the Virtual router.
Address
VMAC address
The VMAC address of the specified router.
Authentication
The authentication type for the specific virtual router.
type
Priority
The priority value for the specific virtual router, taking into account any priority
decrements for tracked interfaces or routes.
ProSafe Managed Switch
Routing Commands
261