ip mcast boundary
This command adds an administrative scope multicast boundary specified by
<groupipaddr> and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr> is a group IP address and <mask> is a group IP mask.
Format
ip mcast boundary <groupipaddr> <mask>
Mode
Interface Config
no ip mcast boundary
This command deletes an administrative scope multicast boundary specified by
<groupipaddr> and <mask> for which this multicast administrative boundary is applicable.
<groupipaddr> is a group IP address and <mask> is a group IP mask.
Format
no ip mcast boundary <groupipaddr> <mask>
Mode
Interface Config
ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to
active.
Default
disabled
Format
ip multicast
Mode
Global Config
no ip multicast
This command sets the administrative mode of the IP multicast forwarder in the router to
inactive.
Format
no ip multicast
Mode
Global Config
ip multicast ttl-threshold
This command is specific to IPv4. Use this command to apply the given Time-to-Live
threshold value <ttlthreshold> to a routing interface. The <ttlthreshold> is the TTL
threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface. This command sets the Time-to-Live threshold value such that any data
ProSafe Managed Switch
IP Multicast Commands
319