Dos-Control Icmpfrag; Show Dos-Control - NETGEAR ProSafe GSM7224P User Manual

no dos-control icmpv6
This command disables Maximum ICMP Packet Size Denial of Service protections.
Format
no dos-control icmpv6
Mode
Global Config

dos-control icmpfrag

This command enables ICMP Fragment Denial of Service protection. If the mode is enabled,
Denial of Service prevention is active for this type of attack. If packets ingress having
fragmented ICMP packets, the packets will be dropped if the mode is enabled.
Default
disabled
Format
dos-control icmpfrag
Mode
Global Config
no dos-control icmpfrag
This command disabled ICMP Fragment Denial of Service protection.
Format
no dos-control icmpfrag
Mode
Global Config

show dos-control

This command displays Denial of Service configuration information.
Format
show dos-control
Mode
Privileged EXEC
Note: Not all messages below are available in all 7000series managed
switches.
Term Definition
First Fragment
May be enabled or disabled. The factory default is disabled.
Mode
Min TCP Hdr
The factory default is 20.
Size <0-255>
ICMP Mode
May be enabled or disabled. The factory default is disabled.
ProSafe Managed Switch
Switching Commands
212