Show Ip Igmp Interface - NETGEAR ProSafe GSM7224P User Manual

Prosafe managed switch command line interface (cli) 9.0.2
Hide thumbs Also See for ProSafe GSM7224P:
Table of Contents

Advertisement

Term
Definition
Version1 Host
The time remaining until the local router assumes that there are no longer any IGMP
Timer
version 1 multicast members on the IP subnet attached to this interface. This could be an
integer value or "-----" if there is no Version 1 host present.
Version2 Host
The time remaining until the local router assumes that there are no longer any IGMP
Timer
version 2 multicast members on the IP subnet attached to this interface. This could be an
integer value or "-----" if there is no Version 2 host present.
Group
The group compatibility mode (v1, v2 or v3) for this group on the specified interface.
Compatibility
Mode

show ip igmp interface

This command displays the IGMP information for the interface.
Format
show ip igmp interface <unit/slot/port>
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid slot and port number separated by forward slashes.
IGMP Admin
The administrative status of IGMP.
Mode
Interface Mode
Indicates whether IGMP is enabled or disabled on the interface.
IGMP Version
The version of IGMP running on the interface. This value can be configured to create a
router capable of running either IGMP version 1 or 2.
Query Interval
The frequency at which IGMP Host-Query packets are transmitted on this interface.
Query Max
The maximum query response time advertised in IGMPv2 queries on this interface.
Response Time
Robustness
The tuning for the expected packet loss on a subnet. If a subnet is expected to be have a
lot of loss, the Robustness variable may be increased for that interface.
Startup Query
The interval between General Queries sent by a Querier on startup.
Interval
Startup Query
The number of Queries sent out on startup, separated by the Startup Query Interval.
Count
Last Member
The Maximum Response Time inserted into Group-Specific Queries sent in response to
Query Interval
Leave Group messages.
Last Member
The number of Group-Specific Queries sent before the router assumes that there are no
Query Count
local members.
ProSafe Managed Switch
IP Multicast Commands
345

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents