Show Ip Ospf Interface - NETGEAR ProSafe GSM7224P User Manual

Term Definition
Subtotal
Number of entries for the identified area.
Opaque AS
Number of opaque AS LSAs in the database.
Total
Number of entries for all areas.

show ip ospf interface

This command displays the information for the IFO object or virtual interface tables.
Format
show ip ospf interface {<unit/slot/port> | loopback <loopback-id> |
vlan <1-4093>}
Mode
• Privileged EXEC
• User EXEC
Term Definition
IP Address
The IP address for the specified interface.
Subnet Mask
A mask of the network and host portion of the IP address for the OSPF interface.
Secondary IP
The secondary IP addresses if any are configured on the interface.
Address(es)
OSPF Admin
States whether OSPF is enabled or disabled on a router interface.
Mode
OSPF Area ID
The OSPF Area ID for the specified interface.
OSPF Network
The type of network on this interface that the OSPF is running on.
Type
Router Priority
A number representing the OSPF Priority for the specified interface.
Retransmit
A number representing the OSPF Retransmit Interval for the specified interface.
Interval
Hello Interval
A number representing the OSPF Hello Interval for the specified interface.
Dead Interval
A number representing the OSPF Dead Interval for the specified interface.
LSA Ack
A number representing the OSPF LSA Acknowledgment Interval for the specified
Interval
interface.
Transit Delay
A number representing the OSPF Transit Delay for the specified interface.
Interval
Authentication
The OSPF Authentication Type for the specified interface are: none, simple, and encrypt.
Type
Metric Cost
The cost of the OSPF interface.
Passive Status
Shows whether the interface is passive or not.
OSPF
Indicates whether to ignore MTU mismatches in database descriptor packets sent from
MTU-ignore
neighboring routers.
ProSafe Managed Switch
Routing Commands
297