No Boot Auto-Copy-Sw; Boot Auto-Copy-Sw Trap; No Boot Auto-Copy-Sw Trap; Boot Auto-Copy-Sw Allow-Downgrade - NETGEAR ProSafe GSM7224P User Manual

no boot auto-copy-sw

This command disables stack firmware synchronization.
Format
no boot auto-copy-sw
Mode
Privileged EXEC

boot auto-copy-sw trap

This command sends SNMP traps related to stack firmware synchronization.
Default
Enabled
Format
boot auto-copy-sw trap
Mode
Privileged EXEC

no boot auto-copy-sw trap

This command disables sending SNMP traps related to stack firmware synchronization.
Format
no boot auto-copy-sw trap
Mode
Privileged EXEC

boot auto-copy-sw allow-downgrade

This command enables downgrading the firmware version on the stack member if the
firmware version on the manager is older than the firmware version on the member.
Default
Enabled
Format
boot auto-copy-sw allow-downgrade
Mode
Privileged EXEC

no boot auto-copy-sw allow-downgrade

This command disables downgrading the image.
Format
no boot auto-copy-sw allow-downgrade
Mode
Privileged EXEC

show auto-copy-sw

This command displays the stack firmware synchronization configuration status.
Format
show auto-copy-sw
Mode
Privileged EXEC
ProSafe Managed Switch
Stacking Commands
35