Show Classofservice Trust; Show Classofservice Ip-Precedence-Mapping; Show Classofservice Ip-Dscp-Mapping - NETGEAR ProSafe GSM7224P User Manual

The following information is repeated for each user priority.
Term Definition
User Priority
The 802.1p user priority value.
Traffic Class
The traffic class internal queue identifier to which the user priority value is mapped.

show classofservice ip-precedence-mapping

This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The unit/slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format
show classofservice ip-precedence-mapping [<unit/slot/port>]
Mode
Privileged EXEC
The following information is repeated for each user priority.
Term Definition
IP Precedence
The IP Precedence value.
Traffic Class
The traffic class internal queue identifier to which the IP Precedence value is mapped.

show classofservice ip-dscp-mapping

This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
Format
show classofservice ip-dscp-mapping
Mode
Privileged EXEC
The following information is repeated for each user priority.
Term Definition
IP DSCP
The IP DSCP value.
Traffic Class
The traffic class internal queue identifier to which the IP DSCP value is mapped.

show classofservice trust

This command displays the current trust mode setting for a specific interface. The
<unit/slot/port> parameter is optional and is only valid on platforms that support
independent per-port class of service mappings. If you specify an interface, the command
ProSafe Managed Switch
Quality of Service (QoS) Commands
446