Dvmrp Commands; Ip Dvmrp(Global Config); Ip Dvmrp Metric - NETGEAR ProSafe GSM7224P User Manual

If you use the summary parameter, the command displays the following column headings in
the output table:
Term Definition
Source IP
The IP address of the multicast data source.
Group IP
The IP address of the destination of the multicast packet.
Protocol
The multicast routing protocol by which this entry was created.
Incoming
The interface on which the packet for this source arrives.
Interface
Outgoing
The list of outgoing interfaces on which this packet is forwarded.
Interface List

DVMRP Commands

This section provides a detailed explanation of the Distance Vector Multicast Routing
Protocol (DVMRP) commands.

ip dvmrp(Global Config)

This command sets administrative mode of DVMRP in the router to active.
Default
disabled
Format
ip dvmrp
Mode
Global Config
no ip dvmrp(Global Config)
This command sets administrative mode of DVMRP in the router to inactive.
Format
no ip dvmrp
Mode
Global Config

ip dvmrp metric

This command configures the metric for an interface. This value is used in the DVMRP
messages as the cost to reach this network. This field has a range of 1 to 31.
Default
1
Format ip dvmrp metric <metric>
Mode
Interface Config
ProSafe Managed Switch
IP Multicast Commands
324