Dhcp Client Commands; Dhcp Client Vendor-Id-Option; Dhcp Client Vendor-Id-Option-String - NETGEAR ProSafe GSM7224P User Manual

6 Enabled
7 Enabled
8 Enabled
9 Enabled
10 Enabled

DHCP Client Commands

DHCP Client can include vendor and configuration information in DHCP client requests
relayed to a DHCP server. This information is included in DHCP Option 60, Vendor Class
Identifier. The information is a string of 128 octets.

dhcp client vendor-id-option

Use this command to enable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format
dhcp client vendor-id-option
Mode
Global Config
no dhcp client vendor-id-option
Use this command to disable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
Format
no dhcp client vendor-id-option
Mode
Global Config

dhcp client vendor-id-option-string

Use this command to set the DHCP Vendor Option-60 string to be included in requests
transmitted to the DHCP server by the DHCP client operating in the switch.
Format
dhcp client vendor-id-option-string <string>
Mode
Global Config
no dhcp client vendor-id-option-string
Use this command to clear the DHCP Vendor Option-60 string.
Format
no dhcp client vendor-id-option-string
Mode
Global Config
ProSafe Managed Switch
Enabled broadcom
Disabled --NULL—
Disabled --NULL—
Disabled --NULL—
Disabled --NULL--
Switching Commands
144