Spanning-Tree Bpdumigrationcheck; Spanning-Tree Configuration Name; Spanning-Tree Configuration Revision - NETGEAR ProSafe GSM7224P User Manual

spanning-tree bpdumigrationcheck

Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the <unit/slot/port> parameter to transmit a BPDU
from a specified interface, or use the all keyword to transmit BPDUs from all interfaces. This
command forces the BPDU transmission when you execute it, so the command does not
change the system configuration or have a "no" version.
Format
spanning-tree bpdumigrationcheck {<unit/slot/port> | all}
Mode
Global Config

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The <name> is a string of up to 32 characters.
Default
base MAC address in hexadecimal notation
Format
spanning-tree configuration name <name>
Mode
Global Config
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
no spanning-tree configuration name
Mode
Global Config

spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level is
a number in the range of 0 to 65535.
Default
0
Format
spanning-tree configuration revision <0-65535>
Mode
Global Config
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using to the default value.
Format
no spanning-tree configuration revision
Mode
Global Config
ProSafe Managed Switch
Switching Commands
48