Command Completion And Abbreviation - NETGEAR ProSafe GSM7224P User Manual

Table 6. CLI Mode Access and Exit (Continued)
Command Mode Access Method
Router RIP From the Global Config mode,
Config enter
router rip.
MAC Access-list From the Global Config mode,
Config enter
mac access-list extended
<name>.
TACACS Config From the Global Config mode,
enter tacacs-server host
<ip-addr>, where <ip-addr> is
the IP address of the TACACS
server on your network.
DHCP Pool From the Global Config mode,
Config enter
ip dhcp pool <pool-name>.
DHCPv6 Pool From the Global Config mode,
Config enter
ip dhcpv6 pool <pool-name>.
Stack Global From the Global Config mode,
Config Mode enter the stack command.
ARP Access-List From the Global Config mode,
Config Mode enter the
command.

Command Completion and Abbreviation

Command completion finishes spelling the command when you type enough letters of a
command to uniquely identify the command keyword. Once you have entered enough letters,
press the SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you have entered there are
enough letters to uniquely identify the command. You must enter all of the required keywords
and parameters before you enter the command.
ProSafe Managed Switch
arp access-list
Using the Command-Line Interface
17
Exit or Access Previous Mode
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter exit. To
return to the Privileged EXEC mode, enter
Ctrl-Z.
To exit to the Global Config mode, enter the exit
command. To return to the Privileged EXEC
mode, enter Ctrl-Z.
To exit to the Global Config mode, enter the
exit command. To return to the Privileged
EXEC mode, enter Ctrl-Z .